Land Rover Car Key Replacement in Hamilton

The older Jaguar Land Rover immobiliser on pre-2015 vehicles, and KVM — the Keyless Vehicle Module — on 2015 and newer. KVM work is done at the module, and an all-keys-lost is a considerably longer job than a spare, so we will tell you which yours needs before we come out.

Losing every key is a different job from cutting a spare. There is no original to read, so the new key has to be generated from the vehicle itself. On most Land Rover models we do that through the OBD port: the diagnostic tool talks to the immobiliser, authenticates, and writes a brand-new key into the vehicle's memory.

Where a model will not accept a new key over OBD — some older immobiliser boxes and a few later security modules simply refuse — we read the immobiliser or ECU memory directly, recover the key data held in it, and write a new key from that. That is EEPROM work, and it is done in the van at your vehicle rather than sent away. It is slower than an OBD job and priced accordingly, but it means an all-keys-lost Land Rover does not need towing to a dealer.

Cutting you a new key does not stop the old one working. If a Land Rover key has been lost, stolen, or kept by a previous owner, the car will still start for whoever holds it until that key is removed from the immobiliser's memory.

Ask us to delete it and we de-register the missing key so it no longer starts the vehicle. It costs nothing extra while we are already programming a replacement, and it is the part most people do not think to ask for. Worth doing on any second-hand purchase where the seller could not hand over every key.

Not every Land Rover on Waikato roads was sold new here. Vehicles that arrived used from another market can carry a different immobiliser generation and a different key blank from the NZ-new version of the same model and year, even when the two look identical.

Remote frequency is the usual giveaway: vehicles built for New Zealand, Australia and Europe generally run at 433MHz, while cars built for other markets often sit elsewhere on the band. A remote bought online for the wrong market will not talk to the car even when the blade fits.

This is why we ask for the registration before we set off rather than just the make and model — it tells us which build the vehicle actually is, so we bring the right blank and the right equipment the first time.